Components

– ISO 13485 Assembly Facilities – Environmental Clean Rooms – End Fitting Attachments • Crimping • Micro Swaging • Laser Welding • Gluing – Engineering Testing and Development

– Multi-Taper Grinding – Parabolic Grinding – Step, Plunge, Paddle and Skive Grinds – Advanced Grinds: flats, threads, bumps, hexes, balls

– Turned Parts up to 0.787” diameter – Parts Cut From Stock Down to 0.032” OD – Tolerance of 0.0005”, Repeatability to 0.0001”

– Laser Ablation (Min 0.002” to Max 0.050”) – Mechanical Removal – Solid, Strands or Cables

– Removes slag, machining artifacts, and heat affected zones – Eliminate surface irregularities, rounds sharp edges – Dramatically enhances corrosion resistance and improves performance – Provides enhanced surface reflectivity and brightness

– Stress Relieving • Prepare Tips for Ultra Shallow Grinds – Age Hardening • Stiffness Control • Optimize Torque-ability • Variable Stiffness Wires

– Wall Thickness: 0.001” to 0.035” – Kerf Width: Down to 0.0005” – Cut Tolerance: +/- 0.0002” – Tubing Diameter Range: 0.008” to 0.700” OD

– Weld Type: spot, seam, butt, lap and circumferential welds – Laser Spot Sizes Down to 0.0004” – Welding of Similar and Dissimilar Materials – Low Heat Affected Zones (HAZ)

– Multi Axis Micro Abrasion Process – Micro-Sized Abrasion Media – Roughen, Shape and Removal of Surface Oxides and Contaminants

– Fluidized Bed Treatment – Active Af Testing – Simple to Complex Geometries

– Straight and Cut Length Wires (min. 0.001” to 0.125” diameter) – Straight Linear Toque Wire (SLT®) • SLT® Mandrel Grade • SLT® Ultra-Fine Grade – Burr Free Cutting, Shear Cutting, Deburring, Chamfering, Conical Pointing, End Rounding

– Flats as thin as 0.001” – Methods: Static Hydraulic Flat Drops and High Pressure Rolling

– 2-D and 3-D Wire Bending – Tube Bending – Tube Flairing